How to Measure for a Replacement LED Light Engine
A light engine is the flat, round LED module inside a ceiling fan light or flush-mount fixture. Our sizes (3", 4", 5.5", 7" and 8.5") are nominal. Before you order, take the glass or diffuser off, turn off the power, and measure three things on the old module.
1. Overall diameter
Measure edge to edge across the old module, including the mounting plate. Pick the size whose overall diameter is the same or slightly smaller, so the new module fits inside the fixture and under the glass.
2. Mounting holes
Measure center to center between the screw holes the old module uses. Each product page has a dimension drawing that shows where the mounting slots are on the new module.
3. Depth
Measure from the surface the module mounts to, up to the inside of the glass or diffuser. The new module, including its driver, needs to fit in that space. The dimension drawing on each product page shows the module height.
Sizes at a glance
| Size | Light engine | Overall diameter | Power | |
|---|---|---|---|---|
| 3" | 3.3" | 4.04" | 10W | Shop 3" |
| 4" | 4.4" | 5.39" | 17W | Shop 4" |
| 5.5" | 5.82" | 6.73" | 23W | Shop 5.5" |
| 7" | 7.4" | 8.39" | 28W | Shop 7" |
| 8.5" | 8.78" | 10.2" | 40W | Shop 8.5" |
All sizes run on 120V and are dimmable.
Not sure which one fits?
Send us a photo of the old module with a ruler across it, and we will tell you which light engine to order.
